Posts

EV comes inside

Image
With the rover out of the garage the electric car could FINALLY be brought in. Thought I'd take a couple pics of it first "drive" into the garage. I also loaded the motor and trans into the car. Still deciding on engine and trans placement. I'll probably go with the factory placement for the transmission but I have been toying with moving it back 8". Makes for a lot of extra room in the front. The driveshaft from an automatic car is 8" shorter than the manual car and bolts up so that would be no issue. However customizing the shifter seems like a big pain. My time is probably better spent elsewhere on the car. Other task was to remove the tank. This was actually quite easy. Remove the boot from the e-brake lever. Remove the nuts on the cables. Pull them out from under the car. Take out the three bolts holding the tank in and volia. After I had it out I found it still contained gas. I was under the impression it had been drained. So I pumped out 4 gallons

Other projects distract me

Image
Progress was delayed a bit as my rover needed some love. Here is the sparkly clean engine after re fitting the heads and rocker arms Of course a good helper is the key to a successful job (torquing the head bolts)

Motor Spinning the trans test

http://www.youtube.com/watch?v=zjhz9f9WXA8

Cutting the plate picture

Image
Here's a screen grab from the cutting process. I have it in movie form but it pretty much looks like the picture with the noise of the saw going I put the bolt holes into the transmission adapter plate by bushing the trans bolt holes with some thin metal then drilling through the bolt holes. Then enlarging them to the right size. On my trans the locating dowels are in the same location as a bolt hole so I drilled that through the bolt hole. Counterbored with the closest standard drill size to the dowel hole. Then used a rotary file (round dill bit like attachment with a flat bottom. Kind of like and end mill) in my drill to enlarge them slightly and I mean slightly enlarge the hole and cut a square edge at the bottom of the hole. Worked great. As others have done I then put the motor spacer plate on and the trans adapter plate and assembled them so they were against each other but not bolted together. I then spun the motor to center the trans. Drilled and doweled the two plates tog

Motor adapter pictures

Image
Nothing really new to report. Just thought I'd add some pictures since pictures are fun. Notice how close to the trans I mounted the motor. The larger plate is .5" thick and the smaller one about the dia of the motor is 5/8" thick. No modifications to the transmission side were required. The extra space may not matter. Have to see but either way a thinner spacer is lighter. By the way I cut out the plates myself (exception being the precision hole in the motor spacer plate) using a simple hand jigsaw and an with an aluminum blade. What I thought made it go well was to pour water on the blade/plate to keep things cool. To do the motor spacer plate I'd say it took just under an hour and a gal or so of water.

Adapter Plate DONE!

Image
Update. I reassembled the transmission and I cut out my adapter plates. The trans now mounts to the engine and spins without the rock crusher sound Thinking seriously about mounting it into the car. Adapter plate cut out Assembled Stacked and bolted

Zilla Arrives

Image
Ok after about 8 months of waiting it arrived!! The zilla's here. Pretty exciting. Surprisingly I didn't just tear open the boxes. I had a Sim racing league race that evening so i just put them aside. However as fate would have it my computer hiccuped after qualification and I wasn't able to race. So I opened the boxes and basked in the glory of having more EV parts. Let's re-live the box opening for those that haven't done it. Here is what it looks like when it arrives. Just Like Christmas. In side the box is 2 smaller boxes. The controller in one and the hairball and cables in the other. Of course included is the handy dandy notebook...or manual. I also purchased the hall effect pedal (in it's own box) so I can do the full drive by wire. Here it all is right before I reboxed to put on the shelf. . Guess I need to get to work on it all again.